sticks | Crown Surface Solutions

View in Room >

Sticks

Zintra Sticks is a range of fabricated acoustic sticks supplied ready to install as a complete system (aluminum frame + sticks) or as individual sticks. Available in 2745 mm lengths, the Zintra Sticks range includes two stick profiles; narrow and wide that can be installed to walls or ceilings in your choice of landscape or portrait direction. Purpose designed transition pieces that seamlessly join the systems at inside and outside corners are also available.

Zintra Sticks is a cost effective, light weight and easy to install solution that works with the complete range of Zintra Acoustic Plain and Timber colours and delivers an NRC of 0.9.

Sticks Narrow

Sticks Wide

Sticks Technical Detail In Portrait

Sticks Technical Detail in Landscape

Specifications

Dimensions

Individual sticks
wide 2745mm h x 102mm w x 48mm d, narrow 2745mm h x 42mm w x 48mm d

Material

100% Virgin Polyester

Colour

Available in all 20 Zintra 1/2" Sheet colours plus 4 Timber colours

NRC Rating

0.90

Weight

24Kg/m2

Thickness

12mm

Use

Indoor only

Environment

Zintra is fully recyclable at end of life.

How to Specify

1. Design 2. Colour

Match

Supplied As

Individual Sticks or Bundles

Fabrication

Exacto knife is required

fire rating

In accordance with: ASTM-E84 - Class A classification, AS ISO 9705 - 2003 - Group 1 classification
EN-13501 - B-s2-d0 classification. Tested in accordance with CAN/ULC S102-10

Care Instructions

Vacuum to remove dust. Remove spills immediately using a clean damp cloth or with soap and water. Polyester carpet and fabric cleaners can be used (always test an inconspicuous area first). A stain repellent coating is available for additional protection.

Disinfection - Regular household bleach solution (5.25% sodium hypochlorite) can be used in accordance with Health Canada Cleaning and Disinfection instructions. The solution ratio should be 10% bleach to 90% water. Spray apply the solution as a mist, follow recommended wet contact period and then wipe off the surface moisture.