Panels Specifications 1/2" (12mm), 1/8" (3mm)
Dimensions 1/2" (12mm)
48" x 108" x 0.5" 12200mm x 2745mm x 12mm, custom sizes available
Dimensions 1/8" (3mm)
48" x 108" x 0.125" 12200mm x 2745mm x 12mm, custom sizes available
Colour 1/2" (12mm)
Available in all 20 colours
Colour 1/8" (3mm)
Available in Snow, Cloud, Dove, Charcoal and Shadow
3mm deep V groove
How to Specify
1. Design 2. Colour 3. Thickness (12mm or 24mm)
Pattern matching with seamless hidden joins
Sheet ready to install
Exacto knife is required
Remove spills immediately using damp, clean cloth.
Dab Zintra with a clean, soft white cloth dampened with a mild solution of liquid
detergent and warm water. Repeat using only clean water, then pat dry with a lint
Avoid using wax polishes, solvents or concentrated abrasives.
For more difficult stains, dampen a soft white cloth with a solution of household
bleach (10% bleach / 90% water). Dab gently. Repeat using only a clean, water
dampened cloth to remove bleach concentration then pat dry with a lint free cloth.
Always test in an inconspicuous area first. If care instructions don't deliver the
expected results, cease cleaning method immediately and contract CROWN for
Disinfection - Regular household bleach solution (5.25% sodium hypochlorite) can be used in accordance with Health Canada Cleaning and Disinfection instructions. The solution ratio should be 10% bleach to 90% water. Spray apply the solution as a mist, follow recommended wet contact period and then wipe off the surface moisture.
© 2023 Crown Surface Solutions